Acu-Evac® Eliminates Surgical Smoke Completely
Acu-Evac® is very effective at eliminating surgical smoke which may contain bioaerosols, live and dead cellular matter (including blood fragments) and viruses. First, the patented TX™ nozzle collects a wide field of surgical smoke, then the main filter captures the smoke.
Acu-Evac®’s main filter has an efficiency rating of 99.99997% on particles 0.01 micron and 0.12 micron MPPS. Gases and vapors are absorbed by activated charcoal in the main filter to eliminate the unpleasant odor of surgical smoke.
Starter Packages & Accessories
Everything you need to know to get started
Wall Mount Starter Package
Starter-IE1W, ideal for procedure rooms with a fixed set up. Mount next to electrosurgical unit and near exam or surgical table.
Includes:- Acu-Evac®
- Wall Mount Bracket
- Main Filter (M-1)
- Hose
- 5 TX Nozzles
Click for ordering details
Accessories:
M1/M2 Main Filter
Consists of a charcoal/odor filter and an ULPA filter - rated 99.99997% efficiency on particles 0.01 micron and 0.12 microns MPPS. Filters have been tested and certified to be free of leaks at time of shipment. Sealed unit with plug for easy disposal. M-1 has 16 procedural hours, M-2 has 32 procedural hours. All Acu-Evac® filters are individually leak-tested and certified.
TX and LTX Nozzles
Only the patented TX™ Nozzle is designed to capture more surgical smoke from further away. Acu-Evac®’s "Flared Horn" design has and increased field of influence and venturi effect for maximum capture and better visibility.
Which Model is Right for You?
Acu-Evac® IE
Surgical Smoke Evacuator
Choose The IE Model For Enhanced Performance Because the IE Model has a higher volume performance and increased flow rate, it is ideal for procedures that generate a high volume of surgical smoke such as Erbium and CO2 laser procedures, as well as electrosurgical and laser hair removal procedures.
- Motor (Model IE):AC
- Air Volume (Model IE): 100+ CFM
- Air Velocity: >11,000 FPM
- Static Suction (Model IE): 63 inches H20
- Noise: <50db
- Power: 110-120V 50/60Hz at 7.0 amps or 220-240V 50/60 Hz at 4.0 amps
- Collection Nozzle: Patented 3-inch Clear Hyperbolic Horn with 1.3 inch I.D.
- Coefficient of Entry: 98%
- Loss, Fraction of Velocity Head: 4%
- Field of Collection: For maximum collection, hold within 3 inches
- Convenience Features: Front end filter loads within seconds, rotary variable air flow dial, variety of mounting options
- Main Filter: ULPA/Carbon filter, rated at 99.99997% at 0.01 micron and MPPS 0.12 micron
- Housing: Sealed, closed system
- Filter Life Monitors: Electronic timer - 16 hours, PLUS low flow sensor/full filter alert
- Footswitch: Pneumatic
- Cabinet: Non-corrosive/non-conductive
- Cabinet Depth: 6.5 inches
- Cabinet Height: 15.5 inches
- Cabinet Width: 11.5 inches
- Weight: 16.5 lbs.
- Footprint (with cart): 16 inches Width X 19.5 inches Depth X 44.5 inches Height
- Cord/Plug: 8 ft. hospital grade
- Classification: Type BF Class 1
- Certification: UL2601-1, 2nd Edition, CAN/CSA C22.2 Standard 601.1-M90, CE Certified (220-240V Models)
- Warranty: 2 years (parts & labor)
Click for ordering details
Acu-Evac® II
Surgical Smoke Evacuator
Choose The II Model for Ultra Quiet Operation and Longer Service Life The Acu-Evac® II is virtually the same as the Acu-Evac® IE model, with one important difference. The Acu-Evac® II uses a “brushless” direct current (DC) electric motor, (instead of a conventional AC motor) which runs cooler, quieter and provides a significantly longer service life.
- Motor (Model II):DC
- Air Volume (Model II): 64+ CFM
- Air Velocity: >11,000 FPM
- Static Suction (Model IE): 63 inches H20
- Noise: <50db
- Power: 110-120V 50/60Hz at 7.0 amps or 220-240V 50/60 Hz at 4.0 amps
- Collection Nozzle: Patented 3-inch Clear Hyperbolic Horn with 1.3 inch I.D.
- Coefficient of Entry: 98%
- Loss, Fraction of Velocity Head: 4%
- Field of Collection: For maximum collection, hold within 3 inches
- Convenience Features: Front end filter loads within seconds, rotary variable air flow dial, variety of mounting options
- Main Filter: ULPA/Carbon filter, rated at 99.99997% at 0.01 micron and MPPS 0.12 micron
- Housing: Sealed, closed system
- Filter Life Monitors: Electronic timer - 16 hours, PLUS low flow sensor/full filter alert
- Footswitch: Pneumatic
- Cabinet: Non-corrosive/non-conductive
- Cabinet Depth: 6.5 inches
- Cabinet Height: 15.5 inches
- Cabinet Width: 11.5 inches
- Weight: 16.5 lbs.
- Footprint (with cart): 16 inches Width X 19.5 inches Depth X 44.5 inches Height
- Cord/Plug: 8 ft. hospital grade
- Classification: Type BF Class 1
- Certification: UL2601-1, 2nd Edition, CAN/CSA C22.2 Standard 601.1-M90, CE Certified (220-240V Models)
- Warranty: 2 years (parts & labor)
Click for ordering details